+1 vote
30.3k views
in Cnc Lathe by (2k points)
edited by

What are the consequences

Fotoğraf açıklaması yok.

by
14,64 milimetros
by
edited
You can't have anything more than what the scale itself says..14•625..is all there is to read...
by (100 points)
edited by
The mesure is 14,72mm
by
14.65 mm or .5767 in
by
14.65mm nothing else
by
14.65mm (0 point at 14 and look for sharp straight line between 6 and 7 as possible 0.65mm).
by
13.9               .
by
13.71 mm is right
by
Never trust a caliper for measurments smaller than 0.05mm so i should say that the answer is 14.6 - 14.65 -ish.
by
13.72 mm is right
by
14,71 mm ouf course
by
13.7
Because the zero position is wrong, if you use a ruler to measure the required space, it will read 13 +
by
14.75mm is right measurement
by
13.62mm is right measurement
by
14.72...that my awnser
by
14.72 because the zero is between 4 & 5 and the next line parallels the mark for 2 past the 7.
by
14.75-14.85 zeroes line up when closed for the guy that commented about that before and i say 14.75-14.85 because i do not see that well
by
13.68mm bcos of 0.02mm im a machinist lol
by (110 points)
13.70 that is
by
18 is the answer
by
18.10mm is correct answer.
by
18.1 mm that's my answer
by
18.12 mm. possible
by
Amoxicillin 875 Mg  <a href=https://buyciallisonline.com/#>Cialis</a> Pille Viagra Generika Potenzmittel  <a href=https://buyciallisonline.com/#>Cialis</a> Vidal Cytotec
by
18.12mm is the size
by
18.11 mm it is ;0

48 Answers

0 votes
by
14,65 milimetros
by
The drawing in not accurate so we cannot give ang accurate answer.
0 votes
by
13.64 mm and stuff
0 votes
by
13.7

Eid Salah Ali Mohammed
0 votes
by
14,63           .
0 votes
by
14.65 milimeter
by
Correct but if you are looking for Reading of 0.01 mm you should use a micrometer
by
That maybe correct but looking at the vernier scale it is easy to take a measurement within 0.05
0 votes
by
13.62 mili meters
0 votes
by
13.72 mm pretty sure!
0 votes
by

The measure is 14,64 mm.

by
Its 14,71 mm
0 votes
by

13.71 mm sure. 

by
+1
13. 72 mm . Before i mistake
0 votes
by
14.71 is the answer. The first 0 line is past 14mm not to 15mm. The next two lines that lines up are the .71 lines.
by
Or you can say =<14.71 but > 14.72
by
14.71 is the correct
by
14.72 mm  for the list count 0.02mm
by
Do you say .71 because neither line at .70 or .72 align? or because they both align?
...